STOP THOSE PUNCTURES NOW
Genuine Oko On Road Truck & Bus (25-litre workshop drum) - the number one tyre sealant in the world
5 DRUMS AND GET ONE DRUM FREE
Zero tolerance of Puncture problems
Oko Truck & Bus - Does not adversely affect handling or ride characteristics and by helping to advert slow punctures when running intends to keep tyres at their correct pressure, thus maximizing fuel economy
THE PRICE OF OUR PART IS INCLUSIVE OF VAT
DUE TO OUR EXTENSIVE PROGRAMME DEVELOPMENT, THE PRODUCT RANGE HAS EXTENDED, AND IT STILL REMAINS THE BEST TYRE SEALANT ON THE MARKET.
A MAJOR DIFFERENCE IS OKO UNDERSTATES, WE ARE CONFIDENT THE PRODUCT WILL PERFORM AS CLAIMED. IN PERFORMANCE TERMS, OKO ACHIEVES MORE WITH LESS.
BENEFITS
Protection against flat tyres - Punctures can be costly, the cost of protecting a four-wheeled vehicle is far less than the cost of one tyre. Fit to new or fresh tyres for the maximum effect and payback
Tyre Life Extension: By keeping the air in the tyre, and cooling and conditioning it from the inside, Oko extend tyre life by at least 20 >#/p###
Avoid Downtime - Eliminates call-out charges and puncture repair costs
Remoulds - Oko causes no problems, the sealant. The sealant washes out easily.
Vulcanising - First remove Oko with water - then dry the tyre
Retreading - Often limited by the life of the tyre's inner liner, Oko keeps a tyre in a new condition longer, allowing the casing to be re-treaded more often. Oko assists in making retreads last longer
Punctures - Oko will seal the hole in the tread area the moment the puncture happens
Installation - One installation amount will last the legal life of the tyre
RECENT TESTS
OKO On Road Truck / Bus Puncture Free Tyre Sealant
It has been designed to prevent punctures and lengthen the life of faster-moving tyres. With the greater heat that builds up in them
In a matched 5-month test on two identical vehicles
The OKO-equipped tyres had 20 % Less tread wear Than the non - OKO equipped truck
The main steer tyres had 40 % less tread wear
CHARACTERISTICS
Non-corrosive - Non-flammable - Non hazardous - environmentally friendly -
This product contains anti-corrosion agents that protect steel and alloy wheels
Colour - red/ brown - Viscous - Low odour
Oko - is also environmentally friendly and is certified to ISO 14001
As Oko is environmentally friendly - the product will improve your carbon footprint and because it is water soluble it can be easily and quickly removed - no risk or safety labels or warnings are required since the product is not classified as hazardous under current regulations
Product Information
Instructions - All drums have instructions to help with the installation of the product - The actual tyre size will determine the amount of sealant that is required. Oko can be fitted to all tyres or large industry tyres for much less than the cost of a tyre
You will require an Oko application pump for installation with the drum this has an adjustable collar for accurate dosage from 50 ml - 250 ml. This will pump against 60 psi pressure
Tools required - : Valve Core Remover Tool ; Spare valve core ; Clean rag / cloth
Metallic Application Pump
This pump is manufactured will pump against 60 psi - if the tyre is above this pressure then you should remove the valve core and deflate the tyre to avoid damaging the pump
Pump - the downward stroke delivers 250 ml of Oko per full downward stroke - so for example if a tyre requires 1000 ml (1 litre ) you would require 4 strokes
Pump - also has an adjustable collar to deliver smaller quantities, to make any required total amount
unscrew the wing nut on the collar, and move the bottom of the collar to the required line - this can be 50 / 100 / 150 / 200 ml
Then tighten the collar to reduce the stroke to the required amount
see our Tyre Charts or drum for installation quantities
a full set of instructions comes with the pump
Important Information - Cleaning of the pump
Wash the pump thoroughly after use. Place the bottom of the pump into a bucket of water and operate the handle until clear water flows through the hose end that is attached to the pump
This will ensure the pump lasts a long time
The label on the drum will tell you the exact quantity of tyre sealant that is required for each tyre.
ONCE YOU HAVE APPLIED THE CORRECT QUANTITY OF OKO, UNCLIP THE HOSE AND REPLACE THE VALVE CORE IMMEDIATELY, A VALVE CORE EXTRACTOR TOOL THAT GRIPS THE VALVE CORE MAKES THE JOB EASIER WHEN DEALING WITH THE INFLATED TYRE.
INFLATE THE TYRE TO NORMAL PRESSURE, THE TYRE IS NOW PROTECTED WITH OKO TYRE SEALANT AND MAY BE PUT INTO SERVICE IMMEDIATELY. SHOULD A TYRE BECOME SOFT DURING USE THEN CHECK THE TYRE FOR PUNCTURING OBJECTS, THEN RE-INFLATE THE TYRE AND DRIVE THE VEHICLE IMMEDIATELY SO THAT YOU ARE ROTATING THE TYRE SEVERAL TIMES