THE OKO APPLICATION PUMP (250 ML)
THE MORE OKO PRODUCTS PLEASE SEE OTHER LISTINGS
(THE PUMP REPLACES THE DRUM CAP)
THIS PUMP IS ACTUATED WITH AN ADJUSTABLE COLLAR- THE DOSAGE CAN BE ADJUSTED IN 50 ML INCREMENTS FROM 50 ML UP TO A MAXIMUM OF 250 ML
Tools required - : Valve Core Remover Tool ; Spare valve core ; Clean rag / cloth
THE PRICE OF OUR PART IS INCLUSIVE OF VAT
DUE TO OUR EXTENSIVE PROGRAMME DEVELOPMENT THE PRODUCT RANGE HAS EXTENDED , IT STILL REMAINS THE BEST TYRE SEALANT ON THE MARKET.
A MAJOR DIFFERENCE IS OKO UNDERSTATES, WE ARE CONFIDENT THE PRODUCT WILL PERFORM AS CLAIMED. IN PERFORMANCE TERMS, OKO ACHIEVES MORE WITH LESS.
Metallic Application Pump
This pump is manufactured will pump against 60 psi - if the tyre is above this pressure then you should remove the valve core and deflate the tyre to avoid damaging the pump
Pump - the downward stroke delivers 250 ml of Oko per full downward stroke - so for example if a tyre requires 1000 ml (1 litre ) you would require 4 strokes
Pump - also has an adjustable collar to deliver smaller quantities, to make any required total amount
unscrew the wing nut on the collar, move the bottom of the collar to the required line - this can be 50 / 100 / 150 / 200 ml
Then tighten the collar to reduce the stroke to the required amount
see our Tyre Charts or drum for installation quantities
a full set of instructions comes with the pump
mportant Information - Cleaning of the pump
Wash the pump thoroughly after use. Place the bottom of the pump into a bucket of water and operate the handle until clear water flows through the hose end that is attached to the pump
This will ensure the pump lasts a long time
The label on the drum will tell you the exact quantity of tyre sealant that is required for each tyre.
ONCE YOU HAVE APPLIED THE CORRECT QUANTITY OF OKO, UNCLIP THE HOSE AND REPLACE THE VALVE CORE IMMEDIATELY, A VALVE CORE EXTRACTOR TOOL THAT GRIPS THE VALVE CORE MAKING THE JOB EASIER WHEN DEALING WITH THE INFLATED TYRE.
INFLATE THE TYRE TO NORMAL PRESSURE, THE TYRE IS NOW PROTECTED WITH OKO TYRE SEALANT AND MAYBE PUT INTO SERVICE IMMEDIATELY. SHOULD A TYRE BECOME SOFT DURING USE THEN CHECK THE TYRE FOR PUNCTURING OBJECTS, THEN RE - INFLATE THE TYRE AND DRIVE THE VEHICLE IMMEDIATELY SO THAT YOU ARE ROTATING THE TYRE SEVERAL TIMES.
REMEMBER - OKO IS AN IMPORTANT SAFETY AID
OKO = SAFETY / SECURITY / PEACE OF MIND